binder M12-A FLANSCHSTECKER

product number: 99 0433 500 05

  • Manufacturer: binder
binder M12-A FLANSCHSTECKER
Picture may vary
binder M12-A FLANSCHSTECKER
Description:
M12 Male panel mount connector, Contacts: 5, unshielded, screw clamp, IP67, UL, M20x1.5, for the power supply
From 1 pieces per EUR 9,26
From 20 pieces per EUR 7,72
From 40 pieces per EUR 6,62
From 100 pieces per EUR 5,95
in stock: 0 pieces
Single price: EUR 5,95 - EUR 9,26 per pieces
Total price:

EUR 5,95 - EUR 9,26

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 713
Area (short) M12-A
Connector design Male panel mount connector
Termination screw clamp
Connector locking system screw
Bereich Automation Technology - Sensors and Actuators

Electrical parameters

Rated voltage (V) 60 V (125 V UL)
Rated current (40 °C) contacts 1-4: 8 A / Contact 5: 2 A
Insulation resistance > 108 Ω
Contact resistance ≤ 3 mΩ
Insulating material group II
Overvoltage category II
Pollution degree 3
EMC compliance unshielded

Material characteristics

Housing material Zinc die-cast nickel-plated
Contact material CuZn (brass)
Contact body material PA
Locking material Zinc die-cast nickel-plated
RoHS value (Pb)
RoHS description Blei
SCIP number c09d7530-2a0d-47a9-8339-8d8223ed8326
SVHC description Lead
SVHC value CAS 7439-92-1

Technical characteristics

Cross-sectional area (AWG) AWG 16
Cross-sectional area (mm) max. 1.50 mm²
Degree of protection IP67

Other

Approval 1 UL
Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 10 The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to conn
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5 The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the
Security notice 7 The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Security notice 8 To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
customs tariff number 85369010
Aliases 99043350005
99.0433.500.05
99-0433-500-05

Downloads

Product data sheet
3D object
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.

EVG. So Ideas turn into solutions.

Contact us