binder GERÄTESTECKER BF. A F. RADIUS 28MM

product number: 43 1717 025 03

  • Manufacturer: binder
Picture may vary

Description:
Male power connector, contacts angled inwards, Contacts: 2+PE, unshielded, solder, IP40 without seal, UL, ESTI+, VDE
From 1 pieces per EUR 1,59
From 20 pieces per EUR 1,22
From 40 pieces per EUR 1,04
From 100 pieces per EUR 0,92
in stock: 0 pieces
Single price: EUR 0,92 - EUR 1,59 per pieces
Total price:

EUR 0,92 - EUR 1,59

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 210
Area (short) Size A
Connector design Male power connector, contacts angled inwards
Termination solder
Connector locking system Central bolt
Mounting type Housing assembly
Bereich Automation Technology - Solenoid Valve Connectors

Electrical parameters

Rated voltage (V) 250 V
Rated current (40 °C) 10.0 A
Insulation resistance ≥ 1010 Ω
Contact resistance ≤ 15 mΩ
Insulating material group III
Overvoltage category III
Pollution degree 3
EMC compliance unshielded

Material characteristics

Contact material CuZn (brass)
Contact body material PA (UL94 HB)
RoHS value (Pb)
RoHS description Blei
SCIP number 0d1cfc05-d08b-4b52-8586-21e906431bf4
SVHC description Lead
SVHC value CAS 7439-92-1

Technical characteristics

Cross-sectional area (AWG) AWG 17
Cross-sectional area (mm) 1.00 mm²
Degree of protection IP40 without seal
Degree of protection 2 IP65 with seal, see accessories
min. temperature range cable fixed (°C) -40 °C

Other

Approval 1 UL
Approval 2 ESTI+
Approval 3 VDE
Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the
Security notice 7 The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
customs tariff number 85369010
Aliases 43171702503
43.1717.025.03
43-1717-025-03

EVG. So Ideas turn into solutions.

Contact us