binder M12 S LEITUNG 2m PUR KABELDOSE

product number: 77 0690 0000 50703-0200

  • Manufacturer: binder
binder M12 S LEITUNG 2m PUR KABELDOSE
Picture may vary
Description:
M12 Female cable connector, Contacts: 2+PE, unshielded, moulded on the cable, IP68, PUR, black, 3 x 1.50 mm², 2 m
From 1 pieces per EUR 18,84
From 20 pieces per EUR 16,49
From 40 pieces per EUR 14,60
From 100 pieces per EUR 13,19
in stock: 0 pieces
Single price: EUR 13,19 - EUR 18,84 per pieces
Total price:

EUR 13,19 - EUR 18,84

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 814
Area (short) M12-S
Connector design Female cable connector
Termination moulded on the cable
Connector locking system screw
Mounting type Cable mounting
Bereich Automation Technology - Voltage and Power Supply
Cable length 2 m

Electrical parameters

Rated voltage (V) 630 V
Rated current (40 °C) 12.0 A
Contact resistance ≤ 5 mΩ
Insulating material group II
Overvoltage category III
Pollution degree 3
EMC compliance unshielded

Material characteristics

Housing material PUR
Contact material CuSn (bronze)
Contact body material PUR
Sheath material PUR
Single-lead insulation PP
RoHS value (Pb)
RoHS description Blei
SCIP number 714f1c5c-14c7-4353-9942-5426ff22cae5
SVHC description Lead
SVHC value CAS 7439-92-1
Sheath color black
Halogen free yes

Technical characteristics

Cable diameter 7.5 mm
Cross-sectional area 3 x 1.50 mm²
Cross-sectional area (AWG) AWG 16
Cross-sectional area (mm) 1.50 mm²
Degree of protection IP68
min. temperature range cable fixed (°C) -50 °C
max. temperature range cable fixed (°C) 90 °C
min. temperature range cable in move (°C) -30 °C
max. temperature range cable in move (°C) 90 °C

Other

Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 11 In the case of cable connectors with a metal threaded ring, it is imperative to ensure a connection with the PE protective contact of the appliance connector. Connecting cables between appliance connectors that are not connected to the PE contact are not
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to conn
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5 The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the
Security notice 8 To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
customs tariff number 85444290
Aliases 7706900000507030200
77.0690.0000.50703.0200
77-0690-0000-50703-0200

Downloads

Product data sheet
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.

EVG. So Ideas turn into solutions.

Contact us