binder LEITUNG 2m PUR VDE 5x0,75 KABELSTECKER

product number: 79 9157 120 05

  • Manufacturer: binder
Picture may vary

Description:
Snap-In Male cable connector, Contacts: 5, unshielded, moulded on the cable, IP67, VDE, PUR, black, 5 x 0.75 mm², 2 m
From 1 pieces per EUR 15,24
From 20 pieces per EUR 12,83
From 40 pieces per EUR 11,63
From 100 pieces per EUR 10,43
in stock: 0 pieces
Single price: EUR 10,43 - EUR 15,24 per pieces
Total price:

EUR 10,43 - EUR 15,24

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 720
Area (short) Snap-In IP67
Connector design Male cable connector
Termination moulded on the cable
Connector locking system snap-in
Bereich Miniature Connectors
Cable length 2 m

Electrical parameters

Rated voltage (V) 125 V
Rated current (40 °C) 5.0 A
Insulation resistance > 1010 Ω
Contact resistance ≤ 3 mΩ
Insulating material group II
Overvoltage category II
Pollution degree 2
EMC compliance unshielded

Material characteristics

Housing material PUR
Contact material CuZn (brass)
Contact body material PA66 (UL94 V0)
Sheath material PUR
Single-lead insulation EPK
RoHS value (Pb)
RoHS description Blei
SCIP number 87e0ba55-2c52-493e-b94e-26d46ff18137
SVHC description Lead
SVHC value CAS 7439-92-1
Sheath color black
Halogen free yes

Technical characteristics

Cable diameter 8.2 mm
Cross-sectional area 5 x 0.75 mm²
Bending radius, moving cable ≥ 10 x ⌀
Bending radius, fixed cable ≥ 5 x ⌀
Cross-sectional area (mm) 0.75 mm²
Degree of protection IP67
min. temperature range cable fixed (°C) -40 °C
max. temperature range cable fixed (°C) 90 °C

Other

Approval 1 VDE
Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to conn
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the
customs tariff number 85444290
Aliases 79915712005
79.9157.120.05
79-9157-120-05

EVG. So Ideas turn into solutions.

Contact us