binder M12 S WINKELSTECKER 8-10MM AUSSENDURCHM.

product number: 99 0689 58 04

  • Manufacturer: binder
binder M12 S WINKELSTECKER 8-10MM AUSSENDURCHM.
Picture may vary
binder M12 S WINKELSTECKER 8-10MM AUSSENDURCHM.
Description:
M12 Male angled connector, Contacts: 3+PE, 8.0-10.0 mm, unshielded, screw clamp, IP67, UL, VDE
From 1 pieces per EUR 10,92
From 20 pieces per EUR 9,56
From 40 pieces per EUR 8,46
From 100 pieces per EUR 7,64
in stock: 0 pieces
Single price: EUR 7,64 - EUR 10,92 per pieces
Total price:

EUR 7,64 - EUR 10,92

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 814
Area (short) M12-S
Connector design Male angled connector
Termination screw clamp
Connector locking system screw
Mounting type Cable mounting
Bereich Automation Technology - Voltage and Power Supply

Electrical parameters

Rated voltage (V) 630 V
Rated current (40 °C) 12.0 A
Contact resistance ≤ 5 mΩ
Insulating material group II
Overvoltage category III
Pollution degree 3
EMC compliance unshielded

Material characteristics

Housing material PA
Contact material CuZn (brass)
Contact body material PA
RoHS value (Pb)
RoHS description Blei
SCIP number 9610f9e3-81e7-4fb8-844a-34a69d176216
SVHC description Lead
SVHC value CAS 7439-92-1

Technical characteristics

Cable outlet 8.0-10.0 mm
Cross-sectional area (AWG) AWG 16 with wire-end ferrule / AWG 14 without wire-end ferrule
Cross-sectional area (mm) max. 1.50 mm² with ferrule / max. 2.50 mm² without ferrule
Degree of protection IP67

Other

Approval 1 UL
Approval 2 VDE
Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 11 In the case of cable connectors with a metal threaded ring, it is imperative to ensure a connection with the PE protective contact of the appliance connector. Connecting cables between appliance connectors that are not connected to the PE contact are not
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to conn
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5 The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the
Security notice 8 To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
customs tariff number 85369010
Aliases 9906895804
99.0689.58.04
99-0689-58-04

Downloads

Product data sheet
3D object
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.

EVG. So Ideas turn into solutions.

Contact us