binder WINKELSTECKER IP67

product number: 99 0773 000 08

  • Manufacturer: binder
Picture may vary

Description:
Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67
From 1 pieces per EUR 12,32
From 20 pieces per EUR 10,18
From 40 pieces per EUR 8,84
From 100 pieces per EUR 7,50
in stock: 0 pieces
Single price: EUR 7,50 - EUR 12,32 per pieces
Total price:

EUR 7,50 - EUR 12,32

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 770
Area (short) Bayonet NCC
Connector design Male angled connector
Termination solder
Connector locking system Bayonet
Mounting type Cable mounting
Bereich Miniature Connectors

Electrical parameters

Rated voltage (V) 175 V
Rated current (40 °C) 2.0 A
Insulation resistance ≥ 1010 Ω
Contact resistance ≤ 15 mΩ
Insulating material group II
Overvoltage category II
Pollution degree 2
EMC compliance unshielded

Material characteristics

Housing material PA
Contact material CuZn (brass)
Contact body material PA (UL94 HB)
RoHS value (Pb)
RoHS description Blei
SCIP number 9607ab5d-63b0-4e32-935d-905d4a4e0146
SVHC description Lead
SVHC value CAS 7439-92-1

Technical characteristics

Cable outlet 2.5-4.0 mm
Cross-sectional area (AWG) AWG 24
Cross-sectional area (mm) 0.25 mm²
Degree of protection IP67

Other

Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to conn
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the
Security notice 6 The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
customs tariff number 85369010
Aliases 99077300008
99.0773.000.08
99-0773-000-08

EVG. So Ideas turn into solutions.

Contact us